Preparation and use: Pour desired amount of cooled, but previously boiled water, into a sterilized bottle. Using the enclosed scoop, add one unpacked level scoop (8.7g) of powder for each 60mL water. Do not over or under dilute unless directed by a healthcare professional. Cap bottle and shake immediately until mixed. Feed immediately and discard any unfinished formula within 1 hour.
Your baby’s health depends on carefully following the directions for preparation and use. Ask your baby’s doctor about infant formula feeding, including how much to feed.
1. Wash your hands thoroughly.
2. In a large pot of water, bring clean bottles, nipples, rings, caps, and mixing utensils to a full boil; boil for 5 minutes. Cool completely before using. Do not use a microwave oven to sterilize bottles or utensils.
3. Separately, heat enough water to a rolling boil for at least 2 minutes to prepare formula. Allow water to cool to lukewarm.
4. Measure water and pour into sterilized bottle.
5. Using the enclosed scoop, add one unpacked level scoop (8.7g) of powder for each 60mL of water. See Preparation Chart for proper powder to water ratio. Do not over or under dilute unless directed by a healthcare professional. Always add powder to water. Shake well until powder is dissolved. Prepare one bottle at a time.
6. To warm formula, place formula bottle in hot water until lukewarm (body temperature). Gently shake bottle to distribute heat evenly. Formula is lukewarm if you do not feel a temperature difference when placing a drop on the inside of your wrist. Do not use a microwave oven to warm formula bottles. Warming formula above 38°C or using water warmer than 38°C will compromise the L. reuteri.
7. Feed immediately. After feeding, any formula not used within 1 hour should be discarded.
Scoop Storage
1. Pull to separate scoop from inner lid.
2. Scoop powder. When finished, turn scoop upside down.
3. Place upside down scoop on hook on inner rim.
